The SAT2 has created a new standard in emergency call communications via standard phone lines. This advanced technology (telephone line powered) automatically dials the first pre-programmed phone number when the call button is pushed. If there is no connection for whatever reason, such as line busy, circuit busy or no answer, the SAT2 will redial up to 9 additional pre-programmed numbers. The redialed numbers can be the same or different numbers up to 16 digits each, i.e. long distance, local or behind a PABX. You can mix any combination.

The SAT2's ability to identify the calling location is enhanced by transmitting a four digit (DTMF) signal on a programmable timed basis or on command by the receiving station. This feature eliminates the chance of losing a calling location I.D. because of phone line interference or other unexpected occurrences. The SAT2 can be conveniently monitored by using the SAT DBRX.

The SAT2R model has 2 relays. Typical uses are to activate "blue light" applications, door controls or cameras from the remote answering station. The unit can be called and activated remotely and may be programmed or have its program changed to suit new applications on site.

The SAT2 is A.D.A. complaint. It has 2 call progress LED indicators for "CALLING" and "TALK". Instruction labels in Braille are available for the sight impaired.

Several models are available. Choose from Hand free or Handset models, a ring down version, elevator mounts, flush mounts, and weather hoods, etc. When you want the best, dial SES!

• Automatically dials the first pre-programmed telephone number.
• Relay model available (2 relays), transformer provided for relay operation, (flashing light camera activation, open a door or gate, etc.).
• Automatic redial when unit senses line busy, circuit busy or no answer, (up to 9 additional phone numbers of up to 16 digits each can be pre-programmed for redialing).
• Dials extensions, local or long distance numbers, (any combination for redialing).
• Automatic transmission of ID code (4 digit DTMF) or ID on command.
• Programmable retransmission of ID code to ensure accurate unit location.
• Telephone line powered.
• Works behind PABX.
• Dials out touch-tone including "8" pause or "9" pause.
• Visual indication for user call progress, 2 LED indicators ("CALLING" and "TALK" for ADA compliance).
• Braille label for ADA compliance.
• Call progress capability built in to automatically reset unit.
• Programmed via a touch tone phone or at the unit with a SAT2PRGM hand held LCD, menu driven programmer.
• Programmable phone number, redial numbers, talk time, ID code, ID repeat intervals and relay parameters (if relays are available on unit).
• Remote programming (password protected).
• Auto answer and activation from a remote location (password protected).
• Remote hang up.
• Weather resistant housing.

MULTIPLE MODELS AVAILABLE

• Standard - SAT2.
• Standard Flush Mount - SAT2F.
• Standard with Weatherhood - SAT2H.
• Standard Flush Mount Elevator - SAT2FE.
• Relay version - SAT2R.
• Relay version with weatherhood - SAT2RH.
• Relay version Flush Mount - SAT2RF.
• Relay version Flush Mount Elevator - SAT2RFE.

SYSTEM ENHANCEMENTS

• MUI (multiple unit interface).
• Receiver (SATDBRX) for SAT units.
• Stainless steel outer shell.
• Color and graphics upon request.

• Access control / Information phones.
• Surveillance with camera control.
• Elevator control / Computer rooms.
• Parking garages.
• Factories / Commercial use.
• Retirement homes.
• Condominiums / Townhouses.

• Power Requirements:
  SAT2 telephone line powered - standard grade touch-tone. SAT2R telephone line power and 12 volt transformer (supplied).

• Materials:
  Double wall aluminum shell with stainless steel faceplates. (stainless steel shell- optional)

• Mounting:
  Surface, flush or post.

• Touch-Tone Detection:
  Detects short burst 50 ms DTMF tones.

• Ringer Equivalenece: .5A - 1.8B.

• FCC Reg.: CCPW74F-17213-MT-E,

• Shipping Weight: Approx. 5 lbs.

• Operating Environment: Temp.-20F to +140F; relative humidity: 5% - 95% non-condensing.

• Dimensions:
  

SAT2 - 5"w x 7 5/8"h x 2½"d
SAT2F - 6"w x 8½"h x 2½"d
SAT2H - 5"w x 9½"h x 2½"d
SAT2FE - Fits selected elevator opening.
SAT2R - 5"w x 9½"h x 2½"d
SAT2RF - 5"w x 10½"h x 2½"d
SAT2RH - 5"w x 7 5/8"h x 2½"d at bottom and 3¼"d at top
SAT2RFE - Fits selected elevator opening.

Security Gate Systems :: 3983 Ortonville Road :: Clarkston, MI 48348
Tel. (248) 625-8855 :: Fax (248) 922-1585 :: info@simplygates.com
^© Copyright 2002 Security Gate Systems. All rights reserved.