TEC CARD is a powerful, low-cost, two reader card access control system that offers many features and options found only in much more expensive card access systems. TEC CARD accepts most reader technologies and keypads as well.

Programming TEC CARD can be as simple as using the keypad and LCD display on the controller board, or as sophisticated as uploading / downloading using the optional modem. TEC CARD can also be programmed, using touch-tones over a dial-up line.

TEC CARD's capacity can be expanded from it's 2,000 cards. Card holders can be further restricted by time zones and access levels. Entrances can be automatically unlocked and re-locked, and a history of transactions is kept ready to be looked at or printed.

TEC CARD comes ready to handle two readers and has an optional module to provide alarm shunt and door sense. A third optional relay module provides two tamper inputs and two alarm outputs.

• Memory capability up to 2,000 cards with names or 4,000 cards without names.
• Two (2) line, sixteen (16) characters per line, one (1) LCD display.
• Request to exit input.
• Remote relay activation.
• Latching relays.
• Access to full programming mode is protected by a six (6) digit passcode number that must be entered before programming.
• Access to limited programming functions is protected by a three (3) digit password.
• Card reader(s) input two (2) readers, Wiegand, Barium Ferrite, Proximity, Infrared Receiver or Radio Frequency, up to 4,000 cards.
• Bulk loading of consecutive cards (if names not used).
• Strikeout mode if invalid card used X number of times.
• Timed anti-passback (one hour).
• Remote programming from Touch-tone telephone over voice grade phone line.
• Remote relay control using Touch-tone telephone.

• Multiple units capable of sharing same telephone line via MUI's.
• Printer capability RS232 port or current loop to printer.
• Second control relay package, alarm shunt and door sense.
• Third relay package (for CCTV activation, alarm output, two (2) tamper inputs).
• Standby battery.
• IBM XT style keyboard for ease of programming.
• Modem for remote programming.
• Specific card numbers or PINs can hold door open until same card or PIN is used again.
• Clock and calendar, timed unlock and relock. Programmable time zones (8); access groups (8); holidays (9).

• Dimensions: 11¼"w x 11¼"h x 3¾"d.
• Construction: 20 gauge steel - painted.
• Power Input: 16 VAC 15 UL listed transformer (provided with unit).
• Telephone Line: Voice grade RJ11C jack. (if modem option installed).
• Operating Environment: Temperature: -20F to +140F Relative humidity: 5%-95% non-condensing.
• Relay Output: Form A or Form B dry contact 50V @ 3 AMP. Second and third relay available.
• Mounting: Surface
.
• Memory: Non-volatile.
• Shipping Weight: Approx. 10 lbs.

• Apartments / Condominiums
• Office Buildings
• Parking Lots
• Loading Docks
• Trailer Parks
• Factories
• Hospitals, etc.

Security Gate Systems :: 3983 Ortonville Road :: Clarkston, MI 48348
Tel. (248) 625-8855 :: Fax (248) 922-1585 :: info@simplygates.com
^© Copyright 2002 Security Gate Systems. All rights reserved.