SELECT CARD
access control system offers features found only in much more expensive,
PC controlled, card access systems. When the application calls for
controlling only one or two entrances, SELECT CARD is the
easy, reliable and inexpensive solution.
SELECT CARD
is capable of handling 4,000 individually numbered cards and is
expandable to 10,000 cards. The card readers can be Swipes, Inserts,
or even Touchplates. SELECT CARD can also handle Proximity
Readers and Infra-red Transmitters.
Cards can be
made valid or invalid, individually or in groups. No clumsy card
packs or hand held programmers. A built-in LED display and four
(4) push buttons are all that is needed to program. SELECT CARD
also has printer output to record the ins and outs.
|
- Select your technology: Magnetic Stripe, Wiegand, Barium Ferrite, Proximity, or Infra-red.
- Capable
of handling 4,000 individually numbered cards, standard.
- One door system, expandable.
- Easy to
program using four (4) buttons and the built-in LED display. Cards
can be programmed into the system individually or in groups, no
other devices are needed.
- Stand-alone
or remote operation.
- Real time
clock (with battery back-up), for event logging to printer only.
- Automatic
re-lock input.
- Request to exit switch input.
- Printer output capability.
- True anti-pass back.
- Two (2) access levels.
- 10,000 card capacity.
- Second reader input.
- Second output relay with its own adjustable "on time".
- Printer interface to connect to serial printer.
- Printer.
Stand-Alone configuration is available in which the Reader System Remote (RSR) electronics are installed in a steel (DKP II) enclosure, with the reader mounted on its face plate. This avoids the need to wire one of the readers to the controller. Enclosure is ordered with individual reader.
- Restricted parking areas.
- Mini-storage facilities.
- Manufacturing plants.
- Apartments / Condominiums entrances.
- Office buildings.
- Hospital drug rooms.
- Computer rooms.
- Elevator control.
- Restricted machinery and equipment.
- Utility rooms.
|
- Material
Used: Electronics Box - primed and painted light beige; Reader
Enclosure- primed and painted black; Housing Front- stainless
steel.
- Memory:
Non-volatile.
- Power
Input: 12V AC or DC, AC transformer provided with unit.
- Mounting:
Readers-surface, semi-flush, remote or pedestal mount.
- Shipping
Weight: Electronics Box-approx. 4 lbs.; Reader Head Enclosure
- approx. 6 lbs.; Stand-Alone Configuration- approx. 9 lbs.; (all
shipped ground).
- Operating
Equipment: -20F to +140F; Relative humidity: 5% to 95% non-condensing.
- Relay
Output: Form "C" (SPDT) contact and is rated for
48 volts AC or DC at 2 AMPS; shipped selected for N.O. contacts
but may be changed to N.C. contacts by changing jumper on the
PC board.
- Dimensions:
Electronics Box- width 7¾", height 5¾", depth 2¾";
Optional Box- width 11", height 11", depth 3½";
Stand-Alone Configuration- width 6¾", height 7¾", depth
at top 4", depth at bottom 3".
- Wiring
Spec.: Minimum 18 ga. stranded, jacketed wire between transformer
and electronics. Max. distance 250'.
- Grounding:
A good earth ground with a minimum of 16 ga. connected to ground
rod or cold water pipe; must be connected from the unit's metal
enclosure, pin 1 on the power connector, and any shields from
the readers and printer cables.
NOTE: Special metal finishes available upon request. Cards may be configured to your specifications.
|
READER
WARNING REQUIREMENTS
- MAG
STRIPE READERS- The maximum distance allowed between a Mag
Stripe reader and the control unit is 50 ft. using Belden
9940 or equivalent.
- WIEGAND
READERS- The maximum distance allowed between a Wiegand
reader and the control unit is 500 ft. using Belden 9941
or equivalent.
- BARIUM
FERRITE READERS- The maximum distance allowed between a
Barium Ferrite reader and the control unit is 500 ft. using
Belden 9941 or equivalent
- Call
the factory for PROXIMITY and INFRA-RED READERS.
|
Option - Pedestal Mount
|
