The CAT is a full featured access control system. The CAT systems include control of up to 8 entrances, elevator / auxiliary relays (up to 256), card capacity up to 16,200 with names and telephone access capacity of up to 2,700 codes (6 cards per code). The CAT is available with 1, 4, 8 or up to 60 names on the large screen version LCD Directory.

The CAT has, as standard, a 10K event buffer, 9600 baud Modem, or RS232 / current loop serial communication up to 19.2kb and is ready to accept 2 Wiegand output readers. Included are time zones, access levels and several other important features. The firmware is designed for used with Selcom2000. This makes the CAT systems Y2K compliant and they may be used with Windows 95,98 or NT (single user). Selcom2000 is designed to be "intuitive" software for ease of learning and use.

The CAT systems have surge protection incorporated in the design to minimize damage from external voltage surges. These products come with the standard SES 2 year warranty.

• CAT Systems are Y2K compliant.
• CAT2,4, 8 and CATV have capacities up to 2,700 codes and 16,200 cards. This depends on the capacity you choose.
• CAT Systems support up to 8 doors each when using the CATDR4 4 Door remote module.
• CAE unit can control as many as 256 relays when connected to the CATRY8 aux relay modules.
• 8 CAT units can be connected to one phone line and all can be programmed remotely.
• Event buffer to hold 10,000 events (before wraping).
• 9600 Baud modem or RS232 / current loop serial com.
• Windows 95,98/NT (single user) when used with Selcom.
• CAT Systems are available in capacities from 1,4,8 name or CATV large screen LCD (this will display from 8 to 60 names depending on letter size chosen).
• CATC card systems are available in capacities from 500/3000 to 2700/16200. (no voice communication and no LCD directory).
• Clock calendar is standard.
• Surge protection is incorporated into the product design on all inputs and outputs to minimize adverse effects of tansient voltages.
• Code / Card capacities can be upgraded remotely by factory (within specific limits).
• For additional features see TEC series.

• Multiple unit capable of sharing same telephone line with use of MUI. Will allow up to 4 units on one line.
• CATD4 is a plug-on module for expanding the CAT2,4,8 or CATV from 2 to 4 doors.
• CATDR4 is a remote 4 door module that attachs to a CAT system to expand it's capability up to 6 to 8 doors depending on what door configuration the CAT unit has.
• CATRLY8 is a elevator / aux. relay module that contains 8 relays that can be programmed for elevator floor selection, light or HVAC control. Up to 32 CATRY8's can be connected to a CAT system.
• Flush mount ring.
• Special finishes available upon request.

• Residential gated communities or commercial use.
• Apartment buildings / Condominiums / Townhouses.
• Retirement / Convalescent homes.
• Hospitals.
• Office buildings.

CAT2 and CAT4:

• Size: Door dim. 10" wide x 14" high x 3" deep. For semi flush mount housing dim. are 9½" wide x 13½" high at a depth of 2¼".
• Material Used: Housing- 12 ga. structural aluminum; Door 16 ga. stainless steel.
• Finish: Aluminum / stainless steel. Painted weather resistant finish.
• Power Input: 18 volt AC, 40 VA UL listed transformer (provided with unit).
• Emergency Battery: 12V .7 AHR GEL CELL on constant charge (for control of line voltage variation and short term telephone support only), (optional).
• Telephone Line: Standard voice grade RJ11C Jack.
• Mounting: Surface, flush or pedestal mount.
• Memory Type: Non-volatile.
• Tone Detection: Crystal controlled, capable of detecting short burst 50MS DTMF tone.
• Shipping Weight: Approx. 15 lbs.

CAT8 and CATV

• Size: CAT8: 16¼"wide x 19" high x 6" at top and 3 3/8"at bottom. CATV: 21¾" wide x 19" high x 6" at top and 4½" at bottom.
• Construction: Hood 11 ga. structural aluminum primed and painted weather resistant finish; Front panel- 16 ga. brushed stainless steel.
• Shipping Weight: approx. 33 lbs.
• Power Input: 18 volt AC, 50 VA UL listed transformer (provided with unit).
• Mounting: Surface, flush or pedestal mount.
• Memory Type: Non-volatile.
• Tone Detection: Crystal controlled, capable of detecting short burst 50MS DTMF tone.
• Telephone Line: Standard voice grade RJ11C Jack.
• Lighting: Low voltage incandescent.

CATDR4, CATRLY8 and CATC:

• Size: 11½" wide x 11½" high x 3¾" deep.
• Construction: Housing- steel 18 ga. primed and painted. Indoor use only.
• Shipping Weight: approx. 10 lbs.
• Power Input: 18 volt AC, 50 VA UL listed transformer (provided with unit).
• Mounting: Surface.

General:

• Operating Environment: Temp.: -20 to 50C; (CATV temp.: 0 to 40C) Relative humidity: 5% to 95% non-condensing.
• Relay Output: Form C dry contact 35V @ 3AMP.
• FCC Reg.: #CPW74F63331MTE.
• Ringer Equivalence: 0.2A - 0.5B

Security Gate Systems :: 3983 Ortonville Road :: Clarkston, MI 48348
Tel. (248) 625-8855 :: Fax (248) 922-1585 :: info@simplygates.com
^© Copyright 2002 Security Gate Systems. All rights reserved.